28 Ogos 2013

Capsule Filler 100 holes size #0, #1

How to use Manual Capsule Filler 

100: 10x10Holes

Available size : #0,  #1
*limited stock (2 set in stock only)

LAB,small factory,sample room,university and home.


Condition: New
RM390 tak termasuk pos 

*Good Quality Product
*Easy to Use
*Save time

Standard Package:
1. Body plate
2. Director plate
3. Cap plate
4. Middle plate
5. Scoop
6.tamping tool

Procedure :

1.Take the cap sheet. Place it on a clean, dry surface.

2.Place the encapsulation sheet on top of the cap sheet using the black pegs to fix it correctly in place

3.Pour capsule tops into the encapsulation sheet and, using a circular motion, gently shake the tops into the holes. While doing this, cover the gap in the wall of the encapsulation sheet with one hand to avoid spilling the tops.

4.When the holes are filled pour out the excess tops.

5.Remove the encapsulation sheet and put the filled cap sheet to one side.

6.Now take the bottom sheet. Fix the encapsulation sheet to the bottom sheet, using the black pegs to fix it correctly in place.

7.Pour bottoms into the encapsulation sheet and shake as before to fill the holes. Pour off excess bottoms

8.Remove the filled encapsulation sheet and put it carefully to one side.

9.Pour a scoop of powder filler onto the bottom sheet and use the spreader to fill the bottoms.

10.Take the filled cap sheet and place the middle sheet on top using the black pegs to fit it correctly in place.

11.Turn the cap sheet / middle sheet over and fix to the bottom sheet.
Using both hands and equal pressure, press down once to fit both parts of the capsule together.

After payment , please let me know what is the size you need.

Berminat, boleh call/sms : Nizam 016-4369630
Email : nizambidara@gmail.com

Tiada ulasan:

Catat Ulasan